Auston Matthews HueForge

Auston Matthews HueForge I put together. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Sunlu Black Transmission Distance: 1 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #17 (1.44mm) swap to Marine Blue At layer #19 (1.6mm) swap to Blue Gray At layer #22 (1.84mm) swap to Jade White for the rest. Boost MeIf you like this print, please send me a friendly boost. I really appreciate it.