Australian Sheperd

Project: Aussie.hfp Boost MeThanks for the support ;) Have a good print Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Dark Gray Transmission Distance: 0.2 PLA BambuLab Basic Gray Transmission Distance: 0.1 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Gray At layer #14 (1.2mm) swap to Gray At layer #21 (1.76mm) swap to Jade White for the rest. Please leave a comment and like if you like my Hueforge. Thank you very much.