Auto Off U30

I designed these components to improve my prints.
I use a profile that is recommended by the Alfawise. I used CURA 4.0.0
I'll leave you a TextDoc with the final gcode that I use.

I connected a switch to the power supply and to the principal switch of the printer
The principal switch always have to be power on if u want
The cable can be hidden in the space of the "Y" aluminum profile

Was printed in PLA
Layer height = 0.2mm
Thickness of the wall = 0.8mm
Infill 30%
Printing temperature = 200°C
Speed = 50mm/s
With supports everywhere and zigzag
Retraction = 7mm
Edge adhesion 2.0mm

I placed it on the front of the printer. I used a 120v switch and use the final configuration of an Ender 3 so that the bed moves forward when finished.