Auto primer feed

This is an auto primer feed for reloading presses. You will need a spring and a grub screw to complete, as well as your own primer tubes.
You may need to increase scale to account for shrinkage, Mine printed best at 104% with white overture PLA

Parts list:

- Compression Spring 3mm OD 0.3mm Wire Size, 10mm Free Length:
https://www.amazon.com/dp/B0C7QL31YQ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

- 10-32 x 3/16'' Set Screw
https://www.amazon.com/dp/B0CXPN1K6X?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

- Primer Feeder Tubes
https://www.amazon.com/dp/B0BMF59NYM?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Tap not necessary but is inexpensive, and makes the project feel more professional
- 10-32 Plug Tap:
https://www.amazon.com/dp/B0849GHJPF?ref=ppx_yo2ov_dt_b_fed_asin_title

If you don't already have one, you will need a priming arm.
- Lyman Universal Priming Arm:
https://www.amazon.com/Lyman-7728036-Universal-Priming-Arm/dp/B000NSB5VW/ref=sr_1_1?dib=eyJ2IjoiMSJ9.QpzjOxIt6Rbs4jRjeKDe0WkvlevIyEZA8