Auto Tool Length Adjuster for Shapeoko

This is my take on an automatic tool length adjuster for the Shapeoko 3 Standard. I assume this would work on any Shapeoko. I wanted this to be as low profile and straightforward as possible so I created this based on some others I had seen. Here are the detailed instructions and please review all photos for visuals and schematic.

You Will Need
1. A momentary button - I used this one from Amazon for $4
2. Some wire for attaching to alligator clip terminal and to place under the Carbide Touch Probe
3. Three screws - (2) for mounting the clip to the Shapeoko, (1) for the alligator clip post (or you could simply hook to your wire)
4. (Optional) CHEP Printing Profiles

Step 1
Download STL's into your slicer program of choice and print. Models should be oriented in the vertical position and I printed with a brim. Printer settings included in this Thing file. ===NOTE COMMENTS IN PRINT SECTION===

Step 2
Test fit to the Shapeoko and the screw portion.

Step 3
Place the rubbe