Thingiverse
Autolevel arm
by biocatmeat
1
Downloads
3
Likes
0
Makes
Autolevel arm for use with servo and micro switch.
The switch I used is: [Amazon](https://www.amazon.com/gp/product/B073TYWX86/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
Print upright and no need for supports with 20% infill.
Switch is a tight fit on purpose, but can be pressed in with a plyers being careful not to bend the metal arm. Braces prevent pushing the switch in to far. Holes line up and fit 1.75mm filament that can be melted on the ends and pressed flat to secure the switch, though it's a tight enough fit that it probably isn't necessary.
I also included the bracket I used for the servo if that's helpful.
The switch I used is: [Amazon](https://www.amazon.com/gp/product/B073TYWX86/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
Print upright and no need for supports with 20% infill.
Switch is a tight fit on purpose, but can be pressed in with a plyers being careful not to bend the metal arm. Braces prevent pushing the switch in to far. Holes line up and fit 1.75mm filament that can be melted on the ends and pressed flat to secure the switch, though it's a tight enough fit that it probably isn't necessary.
I also included the bracket I used for the servo if that's helpful.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
