Automatic card dealer

Automatic card dealer


Part list :
- arduino Nano
- Oled display 0,96 bi color spi interface (library U8g2)
- 2 servos 9g
- 1 button on off
- 2 push buttons
- battery 18650 and support from https://www.thingiverse.com/thing:2847497/makes


Video : https://youtu.be/fhjNoJFAw04

Soft Arduino
Push Button : pins D5 and A3 (resistor between output and +)
Oled display
SCK ==> D13
SDA ==> D11
RES ==> D8
DC ==> D9
CS ==> D10
Servo for wheel ==> Pin 2 (number of cards to deal)
Servo for trail rotation ==> Pin 3 ,(number of players)

Assembling

Important : don't forget the nail on the card wheel and adjust on the servo's axe to lift a little bit the arm when the end course of servo is reached.

Push buttons are soldered on a small piece of PCB.
Oled display and push button board are glued on the cover with hot glue