Thingiverse
Automatic plant watering system
door Nilkka
48
Downloads
33
Likes
0
Makes
Simple, small and versatile plant watering system using Arduino Nano, 0.91" OLED display, miniature water pump and capacitive moisture sensor. It has separate limits for drying and watering. Some plants like stable moisture, which is achieved by setting the limits close to each other. Some plants prefer dry and moist periods, and this is achieved by setting the limits further from each other.
Moisture value is based on moving average of 10 measurements taken with 2.4 hours interval, i.e. 10 times per day.
After every measurement, pump is operated for 1 seconds to prevent it from jamming. This has been important for reliable operation. Also when the system is started, pump is operated for 2 seconds to show it is functional.
Once in day, moisture measurement is compared with drying and watering limit values to determine need for watering cycle or drying cycle.
If watering cycle is in progress, once in a day the pump is operated for 100 seconds, which is equivalent for 1.5
Moisture value is based on moving average of 10 measurements taken with 2.4 hours interval, i.e. 10 times per day.
After every measurement, pump is operated for 1 seconds to prevent it from jamming. This has been important for reliable operation. Also when the system is started, pump is operated for 2 seconds to show it is functional.
Once in day, moisture measurement is compared with drying and watering limit values to determine need for watering cycle or drying cycle.
If watering cycle is in progress, once in a day the pump is operated for 100 seconds, which is equivalent for 1.5
Nilkka publiceert ook op
3 extra modellen op 2 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
