Thingiverse
Automatic Print Ejector - The Punching Machine
1.6k
Downloads
2.3k
Likes
0
Makes
Achieve 3D printer autonomy by adding an Automatic Print Ejector to your machine. This mechanism will knock the printed part off the bed when it is finished printing. We like to call it the punching machine, Check the video above to see why.
For a complete component list and assembly instructions head to this write up: http://www.matterhackers.com/store/digital-designs/automatic-print-ejector-the-punching-machine
Developed by the MatterHackers Engineering Team - the Punching Machine gives your printer the ability to remove the printed part from the bed without any human interaction. See it in action Here: https://www.youtube.com/watch?v=Viy928RLsdU
- Printing Recommendations -
All parts were printed with MatterHackers Pro Series PLA. http://www.matterhackers.com/store/3d-printer-filament?t=1.75mm%20PRO%20Series%20PLA
Recommended Print settings:
- Layer Height: 0.2 mm Layers
- Perimeters: 2 Perimeters
- 30% Infill
For a complete component list and assembly instructions head to this write up: http://www.matterhackers.com/store/digital-designs/automatic-print-ejector-the-punching-machine
Developed by the MatterHackers Engineering Team - the Punching Machine gives your printer the ability to remove the printed part from the bed without any human interaction. See it in action Here: https://www.youtube.com/watch?v=Viy928RLsdU
- Printing Recommendations -
All parts were printed with MatterHackers Pro Series PLA. http://www.matterhackers.com/store/3d-printer-filament?t=1.75mm%20PRO%20Series%20PLA
Recommended Print settings:
- Layer Height: 0.2 mm Layers
- Perimeters: 2 Perimeters
- 30% Infill
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!