Slicer Discord
Automatic rotating base for moon lamp (LED kit) – 3D printable model from MakerWorld MakerWorld
Decor

Automatic rotating base for moon lamp (LED kit)

590 Downloads
331 Likes
233 Makes
Go to Model
Jupiter (painted) and the MoonA motorised rotating base for your moon/Jupiter or other globe lamp.It's compatible with Tom Fullen's SVS NASA Moon Globe and RynosaurusRex's Jupiter (printed at 150%) or any other globe model provided the opening at the bottom is between 60mm and 110mm.I also have a version without a motor (you can rotate by hand) which you can find here. The model is designed around the readily available tiny but strong N20 motor which is found on eBay or AliExpress. These motors run between 3-12v and are available with various gearbox configurations to suit the required RPM of the project. This model is based on the 30RPM@6V gearbox which drives a 110 tooth bevel gear with an 8 tooth pinion gear. This results in approximately 2 rotations of the globe per minute when running at 5v. The speed can also be controlled by the potentiometer which drops the voltage and RPM - on the lowest setting it's near silent and very slow moving. This is sped up, but it cou
Category
Decor
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
large print
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 2/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
ASA
Min. bed size
200 mm (Large)
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection