Automower Arms

Because a robotic lawnmower needs arms, of course the world needs this.

I'd recommend an infill of 20%, except at the base (the square portion) where I used 100% infill to increase impact strength. I used self-tapping screws, but a better idea would be to prep the area with rubbing alcohol and use Velcro strips to attach securely. Place high enough so that your mower can still utilize it's bumpers as needed.

Obviously, supports are important here given the orientation of the model.

Arms adapted from Mr. Potato Head: https://www.thingiverse.com/thing:3495820
Rear Wing: https://www.thingiverse.com/thing:1627391
Recommended scissors: https://www.thingiverse.com/thing:8463
Sunglasses: https://amazon.com/gp/product/B00G3CSW9A

YouTube: https://youtu.be/jfkLbOpyCxo

###

3/28/2022 UPDATE: I've re-exported the STL from Cura since a few erroneous block-shaped artifacts were appearing. I'd recommend using the flat portions on the end along with a few self-tapping screws t