Slicer Discord
Avalon Classic Arrow Separator – Modelo 3D imprimible de Thingiverse Thingiverse

Avalon Classic Arrow Separator

por mtak
31 Descargas
17 Likes
0 Makes
Ver Modelo
An arrow separator for the Avalon Classic archery backpack storage tube. Using the tube as-is, the vanes on arrows can become easily damaged, especially if you also put the long stabilizer bar in.

This separator has space for 6 arrows and a 25mm stabilizer bar.

The separator includes 3 holes for screwing it in the tube. I found that the easiest way to line up the holes in the outside for drilling is to put a rubber band around the outside, line it up straight visually and then mark the holes. The holes are 90° apart, so for two of the holes, you can use the knit lines in the tube to align.

The holes are 2,5mm. I found that tapping was not necessary using M3 machine screws.
Fuente
Thingiverse
Lo que necesitas para imprimir: Intermedio Baja confianza
Pieza única Tornillería requerida
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 1/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
Postprocesado
Tornillería
Software
Cura, PrusaSlicer o similar
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección