Ave Fenix Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.36x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA Smart Recycled Black Transmission Distance: 0.5 PLA Smart Recycled Red Transmission Distance: 4.4 PLA Smart Recycled Yellow Transmission Distance: 9.3 PLA Smart Recycled Orange Transmission Distance: 5.7This print uses 4 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #11 (0.96mm) swap to Yellow At layer #20 (1.68mm) swap to Orange for the rest.