ave phoenix

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 95.76x170.24mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.3mm and the Actual Depth is 2.4mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #16 (1.36mm) swap to Yellow At layer #17 (1.44mm) swap to Jade WhiteThis slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it. At layer #27 (2.24mm) swap to Black for the rest.