AWTRIX Pixel Clock display

Wall mounted Pixel Clock display powered by AWTRIXAttention! Read before printingPrint suggestionsFirst, decide if you want to print the model as a single part or in pieces.Personally, I printed the model in pieces, due the limited printing volume of my printer, and they fit well together. I recommend buying a light diffuser because, in my opinion, it gives a better effect.However, it is possible to print the diffuser using white plastic (recommended filament below).My advice is to print it in one piece, otherwise the joint will be visible, but I have still uploaded the files to print it in two parts. Hardware setupHardware I used:RGB led matrix WS2812B 8x32 5V (ensure that it operates at 5v)ESP32LDR light sensor GL5516Temperature and humidity sensor HTU2112x M2x20 screwConnections are described at the following link and table: https://blueforcer.github.io/awtrix3/#/hardwareESP32 PINGPIOUsage or part7ADC7 / GPIO35LDR light sensor (GL5516) (optional)8GPIO32Matrix33/3621 (SDA) /22(SCL)Te