Thingiverse
Azorius Keyrune
por AxelTheRed610
21
Descargas
10
Likes
0
Makes
PLEASE READ!!!
This model is not all mine!!! I do not claim ownership of the model!!!
I simply added the Azorius crest to the mesh of the model rather than the texture.
May need to be resized. Length of the whole piece should come out to 9.5 inches, with the bottom piece being 101.6 mm and the top piece should be 145.34 mm.
Please please please show your support for the artist below for the original model! Their work is fantastic!
https://sketchfab.com/3d-models/azorius-keyrune-bea3305939e94366b0bddce02a2f345e
Printer Settings:
Elegoo Mars:
Settings using Translucent Standard Photopolymer Resin (Elegoo)
Layer Height 0.04
Bottom Layer Count: 7
Bottom Exposure Time: 75s
Bottom Lift Distance: 4mm
Lifting Distance: 4mm
Bottom Lift Speed: 20mm/min
Lifting Speed: 40mm/min
Retract Speed: 150 mm/min
Infill: None.
This model is not all mine!!! I do not claim ownership of the model!!!
I simply added the Azorius crest to the mesh of the model rather than the texture.
May need to be resized. Length of the whole piece should come out to 9.5 inches, with the bottom piece being 101.6 mm and the top piece should be 145.34 mm.
Please please please show your support for the artist below for the original model! Their work is fantastic!
https://sketchfab.com/3d-models/azorius-keyrune-bea3305939e94366b0bddce02a2f345e
Printer Settings:
Elegoo Mars:
Settings using Translucent Standard Photopolymer Resin (Elegoo)
Layer Height 0.04
Bottom Layer Count: 7
Bottom Exposure Time: 75s
Bottom Lift Distance: 4mm
Lifting Distance: 4mm
Bottom Lift Speed: 20mm/min
Lifting Speed: 40mm/min
Retract Speed: 150 mm/min
Infill: None.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
