Aztec Tiger Warrior

Project: TIGRE AZTECA.hfpPrint at 100% infill with a layer height of 0.12mm with a base layer of 0.32mmThe Model is 110.43x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.36mmThe Max Depth is 2mm and the Actual Depth is 1.7mmFilaments Used: PLA ESUN NEGRO Transmission Distance: 0.2 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with NEGRO At layer #4 (0.68mm) swap to Blue Gray At layer #8 (1.16mm) swap to Jade White for the rest.