Azure Dragon Bookmark

项目:青龙书签。hfp以100%填充率打印，层高0.08毫米，基层0.16毫米这个模型的尺寸是44.5x160mm毫米您可以在低于最小深度0.48毫米的更高图层高度打印最大深度为2.2毫米，实际深度为2.3毫米使用的灯丝:PLA BambuLab基本黑色传输距离:0.6PLA 蓝传输距离:6PLA Prusament天蓝色传输距离:5.3PLA BambuLab基本白传输距离:5交换指令:从黑色开始在第7层(0.64毫米)，换成深海蓝在第11层(0.96毫米)换成天蓝色在第15层(1.28毫米)，其余部分换成白色。 Project: 青龙书签.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 44.5x160mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Chrominal Deep Sea Blue Transmission Distance: 6 PLA Prusament Azure Blue Transmission Distance: 5.3 PLA BambuLab Basic White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Deep Sea Blue At layer #11 (0.96mm) swap to Azure Blue At layer #15 (1.28mm) swap to White for the rest.