Search tips

core oneall words must appear
"core one"exact phrase
vase -lithophaneexclude a word
Slicer Discord
3DSEARCH / Animals / Baby Bear
Baby Bear – 3D printable model from MakerWorld MakerWorld
Animals

Baby Bear

by Donoph3D · Animals
4 Downloads
4 Likes
0 Makes
Go to Model
Hey la communauté !! Je vous présente le baby bear je les réalisé en une seul couleur mais libre à vous de le faire en multicolor !⚠ L'impression à durée 2J & 15H vu la grandeur de ce bébé !Réalisé sur la Ultimaker 3 ! & Anycubic Kobra 3 Combo J'espère que cela va vous plaire, si jamais vous avez le moindre soucis n'hésitez pas à me contactez ! Bonne amusement & Bonne impression ! Paramètres d’impression 3DParamètre en 0,15 & 0,16 For MulticouleurSupport : [ ON ] Normal ( pas arborescence )Remplissage: 10% Rectiligne ( Libre à vous de changer )
Category
Animals
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate
Why?
supports needed · 2 colors · large print
Single piece Supports required 2 colors / AMS
Supports 2/3
Assembly 0/3
Settings 1/3
Bed size 2/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
200 mm (Large)
Colors
2 (AMS/MMU recommended)
Est. print time
15 h
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

Donoph3D also publishes on

84 additional models across 3 more platforms

MakerOnline
50 models
♥ 341 ↓ 1,677
Printables
33 models
♥ 225 ↓ 1,385 ⚒ 11
Cults3D
1 model
Verified by matching model titles across platforms.
Frequently Asked Questions
Which 3D printer is suitable for Baby Bear?
Any FDM printer should handle Baby Bear just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.
Does Baby Bear need supports when printing?
Yes, Baby Bear will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
How long does it take to print Baby Bear?
According to the design notes, Baby Bear takes approximately 15 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
Is Baby Bear beginner-friendly?
Baby Bear is a mid-level print. A bit of experience helps, but it's nothing a careful beginner can't tackle with standard slicer settings.
What file format is Baby Bear available in?
Baby Bear is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Baby Bear free to download?
Yes, Baby Bear is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Bear carving statue.
Bear carving statue.
by Kenny the Maker
↓ 13 ♥ 2
3DP Cute animal family
3DP Cute animal family
by shiuan
↓ 540 ♥ 480
Tiny Critters: Mouse, Monkey, Bear
Tiny Critters: Mouse, Monkey, Bear
by craeen
↓ 521 ♥ 607
Simple Animals 4 - Polar Series
Simple Animals 4 - Polar Series
by Eunny
↓ 440 ♥ 350
Nested Animals puzzle
Nested Animals puzzle
by Yana
↓ 179 ♥ 162
3DP Cute animal family
3DP Cute animal family
by mingshiuan99
↓ 170 ♥ 119
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection