Thingiverse
Baby Camera with Raspberry Pi
door idlerun
3
Downloads
1
Likes
0
Makes
Case and mount for a Raspberry Pi based baby camera.
Custom mount may be needed for your own use case. Mount diameter is 9.6mm in mine designed for edge of crib. Adjust as needed.
Requires:
- Nuts and bolts for attaching (metric M1 to M3 used, but others probably fine)
- Raspberry Pi 3b+
- Pi NOIR camera
- USB Microphone: https://www.amazon.ca/gp/product/B079BV4B1X (may want to shorten and re-solder the usb cable)
- Software running gstreamer-based RTSP server as described here: https://idle.run/rtsp-server-rpi-gstreamer
Custom mount may be needed for your own use case. Mount diameter is 9.6mm in mine designed for edge of crib. Adjust as needed.
Requires:
- Nuts and bolts for attaching (metric M1 to M3 used, but others probably fine)
- Raspberry Pi 3b+
- Pi NOIR camera
- USB Microphone: https://www.amazon.ca/gp/product/B079BV4B1X (may want to shorten and re-solder the usb cable)
- Software running gstreamer-based RTSP server as described here: https://idle.run/rtsp-server-rpi-gstreamer
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
