Baby Lamb

Project: Baby Lamb.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Beige Transmission Distance: 8 PETG JAYO White Transmission Distance: 6This print uses 8 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Green At layer #12 (1.04mm) swap to Blue At layer #13 (1.12mm) swap to Brown At layer #16 (1.36mm) swap to Orange At layer #17 (1.44mm) swap to Yellow At layer #18 (1.52mm) swap to Beige At layer #21 (1.76mm) swap to White for the rest.