Baby Peach

As same as the other models, you can resize it only in X and Y. Enjoy this funny peach design ridding on a cannon ball. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 154.44x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA+ Sunlu Yellow Transmission Distance: 10 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Jade White At layer #12 (1.04mm) swap to Red At layer #16 (1.36mm) swap to Jade White At layer #19 (1.6mm) swap to Yellow At layer #25 (2.08mm) swap to Jade White for the rest.