Backfire G2 Nose/Tail Guard

Nose or Tail guard for Backfire G2 boards.

Material and settings used:
- TPE.
- 30mm/s for perimeter and infill.
- No support
- 80% Infill.
- 0.2mm layer height.
- 205° nozzle, 60° bed (Magnetic build plate, stuck well without adding glue).
- Got best results when printed as show in 1st image (upside down).

Attached to the board using BlueTac. Seems to work well for now.
Its what I had on hand, feel free to improvise.