Bad Attitude Cat

by Mano's 3d_Art · Hueforge & Lithophane

1 Downloads

4 Likes

1 Makes

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 140x160mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #14 (1.2mm) swap to Brown At layer #19 (1.6mm) swap to Beige At layer #24 (2mm) swap to Jade White for the rest.