Thingiverse

BadBug RC Glider

by JGAF

0 Downloads

2 Likes

0 Makes

BadBug by JGAF

Bambu Studio Slicer Video:
https://www.youtube.com/watch?v=rMsjDzWOo3E&ab_channel=JGAF

Build video: https://youtu.be/3n9O9Qy3PyM?si=kHTtoEUOkzyJJOKB

v.2
26" wingspan

Required to complete:
9g or smaller servos, 1s lipo battery, receiver, transmitter
1.5mm rod, CA glue

LW PLA or (recommended) CF PP filament - TPU or CF PP for hinges

***approximate C.G. 1/8" behind optional joiner tube line

Throws 3/16" up/down and (3/16" - Maximum) left/right

I'm a homeless full time college student, tips are appreciated:
https://www.paypal.com/biz/profile/slopecorn

3D printing settings
print nose section and center sections behind canopy with 10% honeycomb infill, .4mm line width

print canopy at .3mm line width from clear filament to mimic effect in sample photos

print everything else in vase mode

"recommend cf-pp or lw pla non-foaming, active foaming if you know what you're doing. print mid sections excluding fin with infill (gyroid or whatever)

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

no supports · large print

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA, TPU, Carbon Fiber

Min. bed size

200 mm (Large)

Post-processing

Gluing

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for BadBug RC Glider?

Any FDM printer should handle BadBug RC Glider just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does BadBug RC Glider need supports when printing?

No supports needed for BadBug RC Glider — it's designed to print clean off the bed.

What file format is BadBug RC Glider available in?

BadBug RC Glider is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is BadBug RC Glider free to download?

Yes, BadBug RC Glider is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

BadBug RC Glider

Add to Collection