Thingiverse
Bakugan Display Tower
by medyk3D
50
Downloads
37
Likes
0
Makes
This is remix of chien_fu design.
Watch my video for more details
[youtu.be/i9Voiih_-Z8](https://youtu.be/i9Voiih_-Z8)
##Features
- holds up to 16 Bakugan balls,
- space for cards underneath the base,
- space for Bakucores at the top of the tower and in the inside,
- hex holes at the top are for bakugear items.
##Extendiblity
I designed the base in such a way that it can be easily extended to store more cards if necessary.
##Printing
Use your prefered settings and filament. Only the base needs some custom supports.
All other parts are support free.
But the overhangs of the bakugans holders are about 70 degrees so be sure to fine tune your printer and filament settings.
##Assembly
Assembly is really easy: You just need to use *5 small wood screws* to attach bottom plate to the towers base.
The tower should just slide onto the base.
I did my best to make it perfect fit. But there is possibility of too lose or tight fit.
In case of too loose fit
Watch my video for more details
[youtu.be/i9Voiih_-Z8](https://youtu.be/i9Voiih_-Z8)
##Features
- holds up to 16 Bakugan balls,
- space for cards underneath the base,
- space for Bakucores at the top of the tower and in the inside,
- hex holes at the top are for bakugear items.
##Extendiblity
I designed the base in such a way that it can be easily extended to store more cards if necessary.
##Printing
Use your prefered settings and filament. Only the base needs some custom supports.
All other parts are support free.
But the overhangs of the bakugans holders are about 70 degrees so be sure to fine tune your printer and filament settings.
##Assembly
Assembly is really easy: You just need to use *5 small wood screws* to attach bottom plate to the towers base.
The tower should just slide onto the base.
I did my best to make it perfect fit. But there is possibility of too lose or tight fit.
In case of too loose fit
medyk3D also publishes on
48 additional models across 2 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!