Balisong with nuts

HI evryone, this is the files for my rd printed balisong or as i call it "Dadisong" because dado in my lenguage means nut, so i could coll it nuttisong.

the hardware should snap-fit in and stay in a normal flipping condition. however a bit of glue is very helpful so whe it falls on the ground nothing moves.
some of the nuts, depending on your printer may have a to tight or too loose tollerance, for the ones that were to tight you can fit them in with a soldering iron or something hot, however this makes the nut permanent.

i highly suggest to print this with a brim because some of the supports needed for the pegs are very small, and, at least in my case they would stick to the bed without the brim.

the tollerances for the pivot system can be a bit tight, i did this on purpose as when you aassemble it you can tighten the pivots and move them to create a sort of rce for the washer so it will have less handle play.

i believe this would be best printed with ABS, with my current