Ballet Dancing En Pointe Hueforge

Ballet Dancing Feet Display Picture. Please be mindful that the filaments you choose will completely change this print! I have a very low TD purple and a matte pink which is what I had here. If you have no AMS then you need to add a pause at layers 8, 9 and 11 to manually change the filament. Print at 100% infill with a layer height of 0.16mm with a base layer of 0.2mm The Model is 160x160mm in sizeYou may print at higher layer heights below the Base Thickness of 0.68mmThe Max allowed Thickness is 2.44mm and the Actual Thickness is 2.44mm Filaments Used:#080a0d PLA PolyLite Black Transmission Distance: 0.3#482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1#e4bdd0 PLA BambuLab Matte Sakura Pink Transmission Distance: 3#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filaments Swap Instructions:Start with PolyLite BlackAt layer #8 (1.32mm) swap to BambuLab Basic Indigo PurpleAt layer #9 (1.48mm) swap to BambuLab Matte Sakura PinkAt