Slicer Discord
Balloon Lamp – 3D printable model from MakerWorld MakerWorld
Decor

Balloon Lamp

by 3D_JJJ · Decor
102 Downloads
37 Likes
11 Makes
Go to Model
这是一盏气球灯,它被创造出来后有些人发现它也可以被安装在一只可爱的小熊身上。 注意:连接气球灯的管子(绳子)最好用直径6mm壁厚0.5~1mm的中空无缝金属管,最好是铜的可以很容易的折弯。某宝到处有的买1m大概6~7元钱。 气球里面的灯是拓竹LED灯创意组件的同款LED灯拓竹天猫的购买链接在这里:https://detail.tmall.com/item.htm?abbucket=7&id=740798626165&rn=acd314f548d53aa8247326a580d8bede&spm=a1z10.3-b-s.w4011-25177047232.39.2a961c79pxXHHX&skuId=5107296840136 This is a balloon lamp! After it was created, some people found that it could also be assembled on a cute bear. Tips: The pipe (string) connected to the balloon lamp use a seamless metal tube is recommended with a diameter of 6mm and a wall thickness of 0.5~1mm, preferably copper, which can be easily bent. On line 1meter about 6~7 RMB. The LED lamp inside the balloon is from Bambulab LED lamp kit.
Category
Decor
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
large print
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 2/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
200 mm (Large)
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection