Thingiverse

Balloon Powered Car

von cjbridges

8 Downloads

3 Likes

0 Makes

I used this model as a way to practice tolerances in Fusion 360. The wheel is made to be pieced with a standard skate board bearing. The car wont break any speed records but it works lol. I recommend low infill settings to keep the weight low. Only use the Tire files if you can print in flexible filament. I didn't need to use glue but I did use a lot of force to snap the axles into the bearings.

608 bearing balloon balloon car bearings car flexible filament no support toy 608 bearing balloon balloon car bearings car flexible filament no support toy 608 bearing balloon balloon car bearings car flexible filament no support toy 608 bearing balloon balloon car bearings car flexible filament no support toy

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Warum?

keine Supports · aufwändige Nachbearbeitung

Ohne Supports Einteilig Hardware nötig

Supports 0/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 2/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Nachbearbeitung

Kleben, Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Balloon Powered Car

Zur Sammlung hinzufügen