baloo

Project: baloo.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Grey Transmission Distance: 1 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA Default White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #16 (1.36mm) swap to Grey At layer #20 (1.68mm) swap to Scarlet Red At layer #21 (1.76mm) swap to White for the rest.