Bambu 3D Effect Sheets sticking guide for A1 Mini

I personally liked the larger version of the official model much better because it's simpler to use, a single fixture and application is straightforward. However, unfortunately that is not compatible with the A1 Mini build plate, because it has those protuded bosses on the top left corner while the sheets for the A1 Mini version are mostly rectangularish, and the holes are on the bottom. So I ended up designing one that's especially calibrated to handle the shape of the A1 Mini build plate, featuring two notches or alignment tabs at the middle-top and top-left corner. Optionally, if you want to keep the plate even more secure while you are working on applying the sheet, there will be a mid-print pause for you to add 2 rectangular magnets (20x40x1.9mm) on the slots. Note that you could:Alternatively use any smaller magnets that you can press-fit in the cavity, as long as the thickness matches!Or ignore this and resume the print if you don't need them. I have had great succes