Bambu A1 Mini Wireless Charger (THIN BED MOD)

The A1 Mini Wireless Charger THIN BED PLATE MOD!! **!!WARNING!!**Failure to use your charger in LOW mode may result in a melted mess or worse! This modification to the mini charger is for phones with a case or those that cannot charge via the standard bed plate for some unknown reason. it is a thinner bed with less airpsace between charging coil and phone. I STRONGLY recommend only using Low power mode! I DO NOT RECOMMEND HIGH POWER FAST CHARGING!!! This thinner bed will not work with the original screws. HOWEVER.. You can swap the existing bed plate screws with the screws that are used to hold the PCB inside the charger case. They will interchange without an issue! The thinner bed plate will push down on the wires harder in the charging pad so pay close attention to where the wires are routed! otherwise ,its pretty strait forward! Ive included profiles for the x1 and A1 Mini Printers. hopefully this will help some with the issues theyve encountered! Enjoy!