Bambu Gears Extruder

For the Voron Trident im building i wanted to use as much Bambu parts as i can. So with Bambu P1/X1 Gears and Bambu Extruder Motor i designed an extruder that matches the HGX-LITE mounting points. Its alittle lighter than the HGX. Printed in ASA- No supports Optional- i added Voron logo if wanted to print multicolor, just need to paint it on by clicking on the face. Parts needed P1/X1 gear set Extruder Motor 2-3 M3 Heat inserts - 1 is used for spring tension, but haven't gotten around to it yet. 4 M3x8 1 M3x18 1 Spring - i used a spring from old Ender extruder and i cut it to fit Instructions mount the base to the extruder with 2 M3x8 bolts place the bigger extruder gear in place place the smaller extruder gear. Use a M3x18 or can use longer. the bolt threads into the print fine- i did not use heat insert here but you can. Dont tighted the bolt too tight- need to make sure the arm can move. Optional- heat insert where the spring sits Cut or find spring that fits between the gear and th