Bambu H2 Internal PTFE Splitter

I saw a few other solutions to adding an external TPU feed to the H2 series of printers and tried a bunch and wasn't 100% happy with any of them so I combined features from all of them and came up with my own. This has a slightly curved path for both filament routes with a straight entry for the “normal” route to smooth things out for easiest filament routing. The PTFE connectors are available here: https://a.co/d/7D5DZtF or https://www.aliexpress.us/item/3256809383717930.html?gatewayAdapt=glo2usa4itemAdapt Assembly is fairly easy. Remove the PTFE tube from the hot end then remove the rubber ring from inside the cable guide.Insert the new Y splitter into the cable guide (it's a little snug).Trim the stock PTFE tube to mate up with the end of the Y splitter and insert it into the upper hole on the Y splitter.(H2S Only) Insert the rubber ring into the other cable guide for the TPU filament path.Insert a PTFE tube from the rear of the printer through the TPU port and insert it int