Slicer Discord
Bambu Lab logo purge line gcode – 3D-printbaar model van MakerWorld MakerWorld
Test Models

Bambu Lab logo purge line gcode

7 Downloads
9 Likes
0 Makes
Model downloaden
This is a modified purge line which simply draws a small Bambu Lab logo in the front right corner at the start of a print. This prints in one continuous movement of the nozzle. This gcode is specifically for a P1S/P1P but potentially could be incorporated into other printers. Please research how your particular printer reads gcode before attempting! Many thanks to @KramplauzisGG for creating his Heart Load line https://makerworld.com/en/models/1962017-heart-load-line-for-bambu-p1s-p1p?from=search#profileId-2108936 , as it inspired me to make this. Please support them by downloading their gcode also.Instructions:In Bambu Studio (or Orcaslicer), open your Printer Settings. Select the Machine gcode tab.In the Machine start G-code box, scroll down until you find the nozzle load Line gcode. This should be after the ;===== fmech mode fast check============================ line and before the ;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture wh
Categorie
Test Models
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Software
Cura, PrusaSlicer of vergelijkbaar
Zelfde ontwerper, meer platforms

Rick269 publiceert ook op

25 extra modellen op 2 andere platforms

Geverifieerd door overeenkomende modeltitels op platforms.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie