Slicer Discord
Bambu Lab nozzle clog minimisation – Modelo 3D imprimible de MakerWorld MakerWorld
3D Printer Accessories

Bambu Lab nozzle clog minimisation

232 Descargas
111 Likes
117 Makes
Ver Modelo
EDIT: This will not fit on an X1(C), as the lidar sensor is directly behind the hotend fan. This is my attempt to help minimise nozzle clogging in my P1P, which seems to be a fairly common issue with Bambu Lab printers. One of the theories is that heat from the bed/model is being drawn up into the (relatively small) hotend cooling fan, which reduces its efficiency and ability to cool, especially when dealing with high bed temperatures. This simple cover should help with this. It is held on with the two screws which hold the hotend fan on. The easiest way to fit it is to unload the filament, remove the two screws which hold the hotend assembly in, and pull it down so you have enough room to unscrew the fan screws. Fit the "insulator" piece and then do up the fan screws. I printed in PETG-CF but you can print it in whatever filament you like, except PLA (it's likely to melt) If you give this a try, please leave a comment on whether you find it useful or not. I do not believe that this pi
Categoría
3D Printer Accessories
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Intermedio Baja confianza
Pieza única Tornillería requerida
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 1/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA, PETG, Carbon Fiber
Postprocesado
Tornillería
Software
Cura, PrusaSlicer o similar
Mismo diseñador, más plataformas

Rick269 también publica en

25 modelos adicionales en 2 plataformas más

Verificado por coincidencia de títulos de modelos entre plataformas.
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección