Bambu Lab P1P/P1S Small Form Factor Filter

This filter was designed for those who love to modify their printers. I wanted to use the BentoBox V2.0, but plan on eventually adding a second AUX fan, and it's installation location prevents that. The Bento also takes up a lot of space inside most printers and requires two fans.

My version is much quieter, uses the same HEPA filter from the ILIFE V3 robot vacuum and any activated charcoal medium that's larger than 2mm. It also uses a single Noctua NF-A4x20 FLX 40mm fan to keep it quieter than the rest of the fans in the printer.

Installation instructions:

1.) Install the Noctua fan with the frame facing outwards so that it will suck air into the front of the filter (that way you can visually see if the filter needs to be replaced). It comes with the 4 fan screws you will need. You will need to route the fan cable inside the unit and fish it out from the back.

2.) Glue the front and back half of the filter housing together using superglue. DO NOT SKIP THE FIRST STEP. The f