Bambu Lab - Short Load Line | G-code Technique

Bambu Lab - Short load line - reduce waste and time | G-code trickThe original load line is very long to build up the pressure. With this trick the distance is reduced to arround 1/3rd.Now you safe time on every print and produce less waste.This should work on all Bambu Lab printers, but the G-Code could be different. Below you see my G-Code for a P1S.To-Do:Go into BambuStudio or OrcaSlicer and search for your printer (should work an all Bambu printers)- click the 'little icon' next to the printer (1)- In the printer settings, click on 'Machine G-code' tab (2)- In the 'Machine start G-code' section (3), scroll down and look for the lines ;===== nozzle load line ===============================…….G0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}G0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}G0 X239.5G0 E0.2G0 Y1.5 E0.700G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}M400 The values of X,Y and E are changed to arround 1/3rd of the or