Thingiverse
Bambu Lab Side Spool Holder
di jan_martin
76
Download
116
Likes
0
Makes
Slightly overengineered slim, side mounted filament spool holder with simple bearings for P1P, P1S and X1C.
There are five 3D printed parts needed:
1x main bracket
1x spool roll
1x bearing spacer
1x inner end cap
1x outer end cap
Used printing parameters
PLA
0.6mm nozzle
0.2mm layer height
4 wall and top/bottom layers
50% infill
Most other needed parts are fairly standard
1x 185mm aluminium tube, 8x1mm length, i.e. 8mm OD, 6mm ID
2x bearings type 608 8x22x7mm
2x M3x20mm button head screws with washers
1x 6mm plastic dowel
1x 3,5x35mm self-tapping screw
Additional modifications
Replace the standard 550mm PTFE filament tube by one with 800m length
Add a second tube fitting to the outer end of the rubbery tube duct
I'd be glad to receive some feedback or comments for further improvements.
The shown setup is currently undergoing testing on my Bambu Lab P1S.
Update:
There are five 3D printed parts needed:
1x main bracket
1x spool roll
1x bearing spacer
1x inner end cap
1x outer end cap
Used printing parameters
PLA
0.6mm nozzle
0.2mm layer height
4 wall and top/bottom layers
50% infill
Most other needed parts are fairly standard
1x 185mm aluminium tube, 8x1mm length, i.e. 8mm OD, 6mm ID
2x bearings type 608 8x22x7mm
2x M3x20mm button head screws with washers
1x 6mm plastic dowel
1x 3,5x35mm self-tapping screw
Additional modifications
Replace the standard 550mm PTFE filament tube by one with 800m length
Add a second tube fitting to the outer end of the rubbery tube duct
I'd be glad to receive some feedback or comments for further improvements.
The shown setup is currently undergoing testing on my Bambu Lab P1S.
Update:
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
