Bambu Lab X1C Top Glass Riser

NOTE: You need to Print - Both 3MF from me! (4 Parts) Hey :) I remixed the “Bambu Labs Carbon X1 Top Glass Riser for LED's” Now you can print it without TPU and it works better, we made some updates to the file! 1. 2x 3h printing time - 2 parts fit on the X1C. 2. no TPU needed anymore because we put the part together as one part. We now use 20x2mm EPDM tape as a base for the glass! This seals better, makes no noise and saves us the unnecessary TPU print! 3. we have adjusted the socket a bit so that we can better route the cable to the outside. To the parts list. 1. approx. 130cm 8mm COB Led strip 2. one power supply depending on what LED strip you bought (12/24V) 3. a dimmer if you want, we use an Alexa compatible dimmer. 4. cyanoacrylate glue 5. 20x2mm EPDM (foam rubber) tape for printing: You print everything from PLA, PETG, ABS in your Bambu Lab with a 0.2 er layer height and normal support (no tree structure please) Check the pictures to see how it should look. Always 2 parts just