Bambu Spool Divider - Triple

What it is…I stumbled onto the Bambu Lab Modular Multi Filament Spool by giuliolibrando and thought it was a great idea for consolidating leftover filament, but when I started to print it, I got frustrated with how long it was going to take and how much material it was going to use. To print the three modules, it takes just under 5 and a half hours and uses 174 grams of material. I designed this one to print much faster (62 minutes) and use a lot less material (~50 grams).FeaturesSuper fast print - Ready to use in ~1/5 the time (62 minutes instead of 324 minutes).Less material - ~50 grams vs 174 grams.Integrated filament holdersPrint SettingsIf you're printing from Bambu Handy, I would recommend using your own filament profiles that are hopefully tuned to avoid over-extrusion. There's a little tab that could bind if too much filament is flowing. If you're slicing this yourself, some of the key parameters are listed below.Layer Height - 0.28Slice Gap Closing Radius - 0Only o