Thingiverse
Bananaduck
par tac2
72
Téléchargements
53
Likes
1
Makes
Who doesn't need a Banana duck?
Use "Lay Flat" in Cura to get the feet closer to the plate. Supports and brim are needed under the feet since this is a 3D-scan and not perfectly even.
Supports are crucial, this is quite a tricky print. These were my support settings that worked well and made the supports easy to remove.
Enable Support Brim: Yes.
Support Structure: Normal
Support Pattern Zig Zag:
Support Density 20%
Support Z Distance 1x Layer Height
Support Distance Priority: Z Overrides X/Y
Use "Lay Flat" in Cura to get the feet closer to the plate. Supports and brim are needed under the feet since this is a 3D-scan and not perfectly even.
Supports are crucial, this is quite a tricky print. These were my support settings that worked well and made the supports easy to remove.
Enable Support Brim: Yes.
Support Structure: Normal
Support Pattern Zig Zag:
Support Density 20%
Support Z Distance 1x Layer Height
Support Distance Priority: Z Overrides X/Y
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
