Thingiverse
B&G Forward
von Drummerstix11
1
Downloads
0
Likes
0
Makes
A joke made practical...**Tactical.**
This is a Clamp on forward grip with a flashlight mount designed to fit on a B&G or similar 10mm wand. Far from practical, I still had to make it. Could be useful for treating under eaves and alike to be able to have 2 hands on the wand.
Currently 3 files: the Grip, a top plate with 25mm holder and a top plate with a 30mm holder. 25mm will fit 1" (25mm) flashlight handles, 30mm will fit 1-3/16 (30mm) handles.
**Assembly will require 2 Drywall Screws, a minimum of 1" long or a maximum if 1-5/8" long.
I recommend PETG, PLA+ or ABS for printing if you are going to use these in the field as regular PLA will warp in a hot service vehicle.
Feel free to print, not for commercial sale and **cannot** be sold without prior licensing.
This is a Clamp on forward grip with a flashlight mount designed to fit on a B&G or similar 10mm wand. Far from practical, I still had to make it. Could be useful for treating under eaves and alike to be able to have 2 hands on the wand.
Currently 3 files: the Grip, a top plate with 25mm holder and a top plate with a 30mm holder. 25mm will fit 1" (25mm) flashlight handles, 30mm will fit 1-3/16 (30mm) handles.
**Assembly will require 2 Drywall Screws, a minimum of 1" long or a maximum if 1-5/8" long.
I recommend PETG, PLA+ or ABS for printing if you are going to use these in the field as regular PLA will warp in a hot service vehicle.
Feel free to print, not for commercial sale and **cannot** be sold without prior licensing.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
