Banshee S800 Custom Winglets

These are Left and Right winglets for the Reptile S800 V2 (and V1) They incorporate pressure vents (vortex generators) for the winglets to maintain a straight path and eliminate the usual tail waggle the S800 suffers from. Keeps the wing true and straight

The winglets incorporate holes for 4 / M3x25 socket head bolts that can be glued into the wing tips with CA glue. A left and right guide/setout plate is provided for aligning 2 of the centre screws. 2 Bolts are to be used as guides, and then screw and glue in the remaining 2 bolts. 4 bolts are recommended as reinforcement as the winglets take a lot of punishment on landing.

Highly recommend hot gluing the winglets to the S800 for ultimate strength.

Print settings:

Filament = ABS
Filament Infil = 10-15%
Shell = 3
Layers = 0.20-0.27mm