Baphomet Hueforge

An image of Baphomet sitting cross legged on the floor, ominously contemplating with wings spread. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Pro Black Transmission Distance: 0.3 PLA Kexcelled Gray Blue Transmission Distance: 2.6 PLA PolyLite Steel Grey Transmission Distance: 1 PLA PolyLite Pro White Transmission Distance: 5This print uses 4 unique filaments but you may substitue to your own tastes. Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Gray Blue At layer #8 (0.72mm) swap to Steel Grey At layer #12 (1.04mm) swap to White for the rest. Boost MeGot a Boost to spare? Every little bit helps the motivation. Thank you!MembershipWant to go commercial or maybe just show some love? Consider signing up to show support!