Baphomet Ornate Gothic

 The Model is 134x200.94mm in size. You can change X and Y but Z must remain the same.  You may print at higher layer heights below the Min Depth of 0.48mm  Actual Depth is 3mm Filaments Used: PLA BambuLab Basic Transmission Distance: 0.3 PLA BambuLab Basic Transmission Distance: 2.5 PLA BambuLab Basic Transmission Distance: 6 This print uses 3 unique filaments. Substitute as needed. Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Gray At layer #22 (1.84mm) swap to White for the rest.