MakerWorld
Hueforge & Lithophane
Voir le modèle
Barad-Dur Hueforge
3
Téléchargements
5
Likes
1
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.5x200mm in size You may print at higher layer heights below the Base Thickness of 0.72mm The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.16mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Red At layer #17 (1.44mm) swap to Pumpkin Orange At layer #25 (2.08mm) swap to Yellow for the rest.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
