Thingiverse
Baratza Encore Tray
door senditbro
72
Downloads
45
Likes
4
Makes
Tray to catch coffee grounds from Baratza Encore burr grinder.
Print at 20-30% infill, 0.1-0.28 layer height. Coarser layer resolution means more coffee stuck in the tray... Recommend print the first 2.99 mm at 0.3 and the remaining height at 0.1-0.2 mm.
UPDATE: V1 lengthens catch tray by 20mm and decreases fillet radius from 8 to 4 mm in the back corners of the catch tray to reduce sill dimensions. Also tightened dimensions around grinder to ensure that the tray sits flush with the front of the grinder. These changes should improve the tray's ability to catch grounds.
Print at 20-30% infill, 0.1-0.28 layer height. Coarser layer resolution means more coffee stuck in the tray... Recommend print the first 2.99 mm at 0.3 and the remaining height at 0.1-0.2 mm.
UPDATE: V1 lengthens catch tray by 20mm and decreases fillet radius from 8 to 4 mm in the back corners of the catch tray to reduce sill dimensions. Also tightened dimensions around grinder to ensure that the tray sits flush with the front of the grinder. These changes should improve the tray's ability to catch grounds.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!