3DSEARCH

Discord

Bard and Smaug Hueforge – 3D printable model from MakerWorld

MakerWorld

Hueforge & Lithophane

Bard and Smaug Hueforge

by PolisLBC · Hueforge & Lithophane

13 Downloads

8 Likes

11 Makes

Go to Model

Hueforge image from the movie Hobbit: Battle of the five armies. The fight between the Bowman Bard and dragon Smaug on the Lake town. Size 175x131mm First layer 0,16Layers high 0,08internal packing density 100% Filaments used and swap instructions: Start with blackAt layer #9 (0.80mm) swap to orangeAt layer #17 (1.44mm) swap to yellowAt layer #19 (1.60mm) swap to white for the rest On Bambu A1 Mini was printing time 4 hours and 2 minutes. Good luck.

bard smaug hobbit jrr tolkien lotr lord of the rings HUEFORGE

Category

Hueforge & Lithophane

Source

MakerWorld

Published

19.12.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

175 mm (Medium)

Est. print time

4 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Bard and Smaug Hueforge?

Any FDM printer should handle Bard and Smaug Hueforge just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 175 mm is recommended.

Does Bard and Smaug Hueforge need supports when printing?

Yes, Bard and Smaug Hueforge will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Bard and Smaug Hueforge?

According to the design notes, Bard and Smaug Hueforge takes approximately 4 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Bard and Smaug Hueforge available in?

Bard and Smaug Hueforge is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Bard and Smaug Hueforge free to download?

Yes, Bard and Smaug Hueforge is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

2 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL